Epoxy Flooring Near Me

Benefits Of Epoxy Flooring & Alternatives To Epoxy Sealer Like Microcement


Epoxy Flooring Near Me

So, you’re considering epoxy flooring for your project. Hence, you’re searching, “epoxy flooring near me” But before you decide let’s look at the pros and cons of epoxy flooring so that you really understand what best fits your needs and budget. There are also many alternatives to epoxy flooring to also consider before making up your mind. But no worries, we’ll discuss everything throughout this article.

Benefits Of Epoxy Flooring

Before we start, let’s be clear about epoxy flooring. In simple terms, epoxy is a culmination of epoxide having layered polymers. It is a strong adhesive that bonds with most materials. These include plastic, wood, metal, concrete and much more! Once you add them to your base substrate they enhance your floors and provide a decorative finish. Here are the benefits of epoxy flooring!

Epoxy Flooring (Cons) Vs. Pros

So, you now know about the good aspects of epoxy flooring. But is it perfect? Unfortunately, like everything else, epoxy flooring also has its shortcomings. Let’s review some of the downsides of epoxy floors.

Scratches Easily

There’s no doubt that epoxy floors are durable, but they aren’t free from getting scratches. Abrasive tools like sandpaper, pumice, and sand can cause scratches. So, it would help if you used rubber guards on chairs and furniture and be sure to sweep debris regularly to avoid further scratching. Since epoxy floors are not very hard they are prone to scratching and customers often complain that their new epoxy floor shows wear too quickly.

Looks like Plastic

At the end of the day epoxy is essentially a type of plastic. After your epoxy dries you may be underwhelmed with the finish. The gelatinous substance becomes like a plastic barrier which gives its sturdiness. But at the same time, the overall look can feel cheap and not the high end finish you were hoping for.

It Doesn’t Do Well with Water

Epoxy has a tough time with water. Let’s say you poured new concrete for your floors, which has yet to cure properly. Or your old concrete has absorbed and retained various types of liquid chemicals. In both cases, epoxy can lose it’s bond to the substrate. It can also not be used in wet areas like showers, pools or in exterior settings.

Not the Most High-End Finish

While epoxy has a glossy finish, the final aesthetic can leave a lot to be desired. It is used in some high end applications but it is usually seen as a cost saving system rather than an elegant one. You won’t typically see this in the homes of the rich and famous or in fancy restaurants or hotels.

Can’t be Done Outside

While epoxy flooring can be done and used outside, it is not recommended. This is because the direct sunlight can cause the epoxy to crack and peel off. Also, be careful if your garage has epoxy flooring. Sometimes, you might find the epoxy on your tires due to excess heat, which melts the epoxy and destroys it.

It turns Yellow with Sunlight

One of epoxy flooring’s biggest downfalls its tendency to yellow from UV light. And this occurs due to the hardened resin within the epoxy polymer. Due to the sun’s heat, the resin speeds up the curing process. But speeding it too much will cause the epoxy to have a yellow or amber tint. So, this may be frustrating for you if yellow wasn’t in your original design palette.

Epoxy Flooring Benefits

Extremely Robust

Epoxy ensures that your floor is smooth and sturdy! It is 3 to 4 times stronger than your average concrete floors. Most concrete floors have a bearing force of less than 3000 psi. And since the epoxy polymer becomes a strong plastic barrier after drying, it can handle heavy machinery. These include forklifts, trucks, roller vehicles, buses, you name it.

Ensures Safety

Epoxy is good not only for your capital assets but also for your invaluable workers. With a non-slip coating, people walking on your floors have a lower change of slipping and falling. Many tile and polished concrete floors can be slippery, and, especially when they are wet, there’s a good chance you might slip. A textured epoxy flake flooring could alleviate this concern.

Cost-Effective in the Long Run

The cost of epoxy flooring can vary. It can range from $3-$12/sq ft depending on the type of polymer, floor pre required and desired finish. Many other types of flooring can be pricey to maintain. Tile grout and concrete are porous and can get dirty easily. Lastly, epoxy floors are quick to install.

Easy to Maintain & Very Eco-Friendly

As previously mentioned, epoxy floors are easy to maintain. Normal floors might require a strong acid or alkaline solution for effective cleaning. So, this can cost you a lot, depending on your property’s size. But, for epoxy floors, you don’t need anything special. Just normal cleaning detergent and warm water are all you need! Since epoxy floors don’t have crevices or pores, you don’t have to clean them with more harmful chemicals. Also, the installation procedure makes it less hazardous than other flooring systems. And epoxy doesn’t have any corrosive properties. And due to the shine, you only require a little lighting. Thus, epoxy flooring puts less pressure on the environment and your pocket!

Alternatives To Epoxy Sealer Products Is Semco’s Microcement Products

So, after weighing the pros and cons of epoxy flooring, if you’re not feeling good about it, you may want to consider our microcement alternative to epoxy! And there are various reasons it can be a better option, but we’ll let you judge that. So, here are the advantages of using Semco Microcement.

Can go over Tile, Concrete, and Wood with no Demolition

Microcement can be easily applied of tile, concrete, wood, epoxy and other substrates without the need for demolition or excessive surface preparation. It comes in a thin but durable finish that can hide all of the blemishes underneath.

It Can be Done Inside or Outside

You can apply the Semco microcement anywhere, which includes outside. The heat from sunlight doesn’t affect its performance, look or color over time, unlike epoxy flooring. So, inside or out, you can use micro-cement to resurface your floors and walls with a wide range of high end, naturally looking finishes!

Can be Applied on Floors and Walls

Another major advantage of microcement is its versatility. Thus, micro-cement is good for floors and, likewise, for walls. Thanks to its hardness and flexibility, microcement can work wonders for residential and commercial wall applications.

It Can Go in Wet Areas like Bathrooms, Pool decks, Exterior areas, and Pools

As mentioned earlier, epoxy flooring doesn’t do well in the presence of excess moisture. So, using Semco’s microcement. This cement is completely waterproof and thus will remain unaffected by water.

Natural Stone or concrete look, not plastic look

Microcement is a beautiful thin layered coating that is strong and durable but also aesthetically pleasing. Unlike epoxy’s bland and plastic look, the natural stone, plaster and polished concrete look of Semco’s microcement creates a high end look that world class restaurants, fashion designers and movie directors use as their featured finish. So, if you wish to have that natural stone look, then Microcement is a natural choice.
Epoxy Flooring Near Me, Epoxy Sealers Vs Microcement

X-Bond Seamless Stone is a zero VOC hybrid of natural stone and advanced cross-linking technology.

It mechanically interlocks molecules of the X-Bond Stone to any solid surface enabling REMODEL WITHOUT REMOVAL™. The key to the success of any surface is the method in which it connects with a subsurface. SEMCO’s X-Bond Seamless Stone forms a mechanically bond, while interlocking its own molecules to the surface it is applied creating a “Perfect Bond”.

X-Bond Seamless Stone

  • We offer over 1,000 colors which are organic and UV-stable
  • We offer 4 signature textures: Polished Bond, Natural Grain, Color Bond and ADA Safety Floor
  • Our X-BOND Seamless Stone is designed mainly with water-based products and are environmental friendly.
  • X-BOND Seamless Stone is stone based polymer mix which bond onto the existing surface on a molecular level instead of “normal adhesion”.
  • X-Bond Seamless Stone surface is handcrafted and therefore truly unique.

Bottom Line

So, if you’re still thinking about using epoxy sealers to do you flooring areas, then think again. Remember that everything has its use cases. And while epoxy has its application, you may be much happier using Semco’s Microcement.

Let us know if we can help you choose the right decision that best works best for your flooring needs!

Tags: Epoxy Flooring Near Me, Benefits of Epoxy Flooring, Epoxy Floor Alternatives, Microcement

Alternative to Epoxy is Semco Microcement

Resurface Concrete Without Removal Or Demolition. The main advantage of the Semco system is its ability to repair concrete cracks to the extent that the substrate can be salvaged and there is no need for demolition or an entirely new concrete slab.


Epoxy Flooring

The Semco system is its ability to repair concrete cracks with no need for demolition or an entirely new concrete slab. This reduces both cost and environmental damage that accrues due to demolition and the removal of waste.


Alternative Benefits to Epoxy Flooring

Alternatively in comparison to Epoxy Benefits. Semco’s Concrete Floor Resurfacing (Decorative Concrete) with Semco resurfacing products, you get a variety of colors, polishes and finishes to choose from. And you can even use the colors and finishes to create decorative designs and patters on you concrete surface.

We Do It All

Resurfacing for Tile, Concrete, Hardwood, Epoxy + more!

Semco Florida’s solid surface solutions product line includes four distinct surface treatment systems applicable to a variety of environments and needs. Semco’s Remodel Without Removal is a resurfacing product that allows you to remodel existing surfaces without having to remove the old surface material. The remodel without Removal system can resurface tile and grout, stone, wood, concrete, vinyl, epoxy and more.