Welcome To SEMCO Florida Surface Solutions
SEMCO FL surface solutions offers a simple way to revitalize and resurface tile, concrete or any existing surface!
Make Old Surfaces Look NEW using SEMCO’s Microcement
If you’re tired of that old tile wall and don’t want to go through the hassle of removing, replacing, or painting, resurfacing is the best way to cover wall tiles. Tile Resurfacing involves applying a resurfacing compound called a Microcement over the tile. The resurfacing material is easily applied and usually comes in various surface texture finishes and colors to meet your design needs. The Semco Remodel Without Removal™ resurfacing system is an excellent choice if you want to resurface your wall tile.
It even works on floor tile too.
The Semco system creates a molecular bond with the tile surface, creating a strong, durable, and beautiful new decorative wall or floor.
No Demolition!
We hope you’ll entrust us with your…
Tile, Concrete, Walls, Pool Decks and more, for all your Resurfacing Project needs! You Will Not Be Disappointed!
Our Featured Services
Semco Florida is Florida’s source for Semco’s industry-leading surface solutions and resurfacing products for Concrete and Tile Resurfacing. With a broad range of applications and surface treatment systems, Semco Florida surfacing solutions are used by thousands of residential and commercial customers worldwide. The durability, ease of installation, and the ability to apply to both interior and exterior surfaces make Semco the go to option for concrete resurfacing and other resurfacing projects big and small, including world-class resorts, municipal applications, public school play yards, historical monuments, offices, and residential homes.
Semco Florida proudly serves Miami, Ft. Lauderdale, West Palm Beach, and Florida. Contact us today to find a Semco contractor near you.
X – BOND SEAMLESS STONE
Semco’s X-Bond seamless stone is a zero VOC (zero Volatile Organic Compounds) hybrid of solid stone solid surface solution that gives a sleek, clean seamless stone aesthetic.
Remodel Without Removal™
Semco’s Microcement is uniquely capable of being applied over existing intact surfaces without the requirement for demolition. Great for concrete and tile resurfacing.
CLEAN | COLOR | SEAL
The SEMCO Clean | Color | Seal surface care systems are designed to provide powerful surface cleaning, coloring, and sealing for any solid surface. Very easy to use for concrete and tile resurfacing.
We Do it all
SEMCO Resurfacing Solutions
Click on any resurfacing solution image below to learn more.
Where It Goes
The Semco resurfacing products are a great option for a wide variety of spaces and projects. Our solutions can be used in residential and commercial bathrooms, driveways and garages, exterior walkways, pool decks, roof decks, exterior facades, interior walls and stairs.
What It Can Do
The Semco solution can be used for waterproofing, ADA safety flooring, eco-friendly remodeling projects, decorative concrete, concrete resurfacing, tile and hardwood overlays, and concrete crack repair.
Microcement For Contractors
SEMCO Tile Resurfacing Solutions
ADA Compliant Flooring
Create Friction, Build Ramps, Fill Holes
Waterproofing Solutions
Waterproof, Eliminate Water Damage
Concrete Finishes New Construction
Created Any Aesthetic On Any Surface
Decorative Concrete
Upgrade And Enhance Surfaces
Facade
Resurfacing
Crack-Resistant, Waterproof, Beautiful
Concrete Wall Finishes
Crack-Resistant, Beautiful, Rinse Clean
Interior Floor Resurfacing
Low-Maintenance, Beautiful, Long-Lasting
Bathroom Resurfacing
Rinse Clean, Beautiful, Non-Slip
Concrete Crack
Repair
Crack-Resistant, Waterproof, Beautiful
Stairs
Resurfacing
Slip-Resistance, Long-Lasting, Beautiful
Driveway Resurfacing
Beautiful, Slip-Resistance, Long-Lasting
Exterior Walkway Resurfacing
Durable, Crack-Free, Beautiful
Roof Decks Resurfacing
Non-Slip, Waterproof, Rinse Clean
Pool Deck Resurfacing
Slip-resistant, Low-Maintenance, Beautiful
Tile Resurfacing Example: IT’S THIS EASY!
Step 1
Clean The Tile
Step 2
Rolling Primer And Applying Scratch Coat
Step 3
Grout Line Cover-Up
Step 4
The Finish with Microcement
Before & After // “How To” FAQ’s
Wall tile removal power tool
The best power tool to use is a Pneumatic air impact hammer with a chisel bit. If you have to remove a lot of tile be sure to get a compressor with a large air volume capacity. This way you won’t have to constantly be waiting for the compressor to fill up when you drain the air out of it.
How to remove shower tile without damaging wall
When removing tile or stone from a shower wall resist the urge to smash through it with a sledge hammer or other blunt instrument. While this can be satisfying there can be pipes behind and it creates a lot of extra work when the wall has to be rebuilt. First make sure you protect the area below. If you have a tub make sure the sharp shards of tile do not damage the surface. A thick drop cloth will do the job. Next, cut or scrape into a grout line to access the back side of the tile. It may be easiest to start at an outside corner and work your way in. If you start to have success then slowly work your way into the middle. If your bathroom was installed correctly there should be a rigid surface behind the tile like hardiboard or cement board. This will give you a good substrate to be able to pry against. If the grout is holding the tile in place you can use a heat gun or hair dryer to soften the grout. If you do damage parts of the wall it can always be filled with a compound but it does add to material and labor cost and time to do this
Removing wall tile tool
The best tools for removing wall tile are:
- Heat gun for softening grout
- Small pry bar
- Flat head screw driver
- Chisel and hammer
- Oscillating saw
- Angle grinder with tile blade or Dremel tool with tile cutter
- Sledgehammer (if you aren’t concerned about damaging the wall)
- Pneumatic hammer with chisel bit
Fix loose tile without removing
How to remove wall tiles intact
Floors, Walls, Decks & Tile Resurfacing Videos
We Do It All
Resurfacing for Tile, Concrete, Hardwood, Epoxy + more!
Semco Florida’s solid surface solutions product line includes four distinct surface treatment systems applicable to a variety of environments and needs. Semco’s Remodel Without Removal is a resurfacing product that allows you to remodel existing surfaces without having to remove the old surface material. The remodel without Removal system can resurface tile and grout, stone, wood, concrete, vinyl, epoxy and more.
INNOVATION DRIVEN SURFACE SOLUTIONS
Who is SEMCO FL?
SEMCO Modern Seamless Surface is an innovation-driven surface engineering company. We specialize in the creation of surfacing products for floors, walls, decks and waterproofing. SEMCO is known for its ability to design, create, and deliver customized surface solutions for clients and projects of all sizes, worldwide. Each of our custom projects ensures lasting durability, waterproofing, and proper ADA safety compliance.
SEMCO FL has provided materials and installations for major hospitality, industrial, commercial, public and residential projects throughout the state of Florida.
Tag Cloud: flooring contractors near me, tile companies near me, tile resurfacing near me, tile floor resurfacing near me, waterproofing membrane , liquid waterproofing membrane, bathroom tile repair near me, tile repair near me, tile grout repair service near me, best waterproofing for concrete block, concrete block waterproofing, waterproof plywood, how to waterproof plywood, waterproof wood, concrete resurfacing near me, concrete resurfacer near me, flooring companies near me, floor repair companies near me, flooring installation companies near me, epoxy flooring near me, decorative concrete resurfacing, basement waterproofing near me, basement waterproofing diy, waterproofing membrane, waterproof paint for basement walls
Redefining the art of surface creativity for over 30 years using GREEN Environment Safe materials.
Ready to take your resurfacing needs a step further?
Let’s start talking about your project or idea and find out how we can help you.