Tile Resurfacing Kit Install Instructions

Do it Yourself Tile Resurfacing Kits – Resurface tile floor without removal

1. Surface Preparation

1. Remove loose debris, dirt, soap scum with a scraper. Remove adjacent fittings and fixtures, if practical.

  • If there is foreign material between the tile and Semco it will inhibit the bond and could create
    delamination over time

2. Clean surface using 3 step cleaning process

  • Get the surface damp, spray cleaner and rinse surface between each cleaner (Image 1552)
  • Example in video is over concrete (auto-scrubber not needed on tile, can be done by hand with a plastic bristle brush)

 

                   Surface Preparation Example Video

2. Mask edge of work and protect adjacent surfaces

  • Semco bonds to almost anything so be sure to protect any adjacent metal, wood, plastic, toilets, sinks and tile that is not being resurfaced

Masking Procedure Video

 

 

2. Seamless stone application

1. Scratch Coat – 1 part liquid to 2 parts stone – Apply primer and scratch coat to create permanent bond to the tile and grout (pour stone in container when measuring, do not pack down)

  • Use a mud trowel to assist with walls, apply the scratch coat horizontally to promote bonding
  • Tools – Mixing paddle, mixing bucket, mixing cups, hand broom

 

 

Wall Installation Demo

 

2. Brown Coat – Apply brown coat to hide grout joints, voids and surface irregularities

 


3. Skim Coats – Apply two skim coats, sand between coats for a smoother surface

 

 

3. Sealer Application

Sealer – Allow surface to dry at least 10 hours and apply 3 coats of sealer

 

Let’s Hear you!

Ready to take it a step further? Let’s start talking about your project or idea and find out how we can help you.

Request a free quote

        

Close

Other Applications

REquest A Free Quote

What Are You Looking For?





Contact

Semco Florida Surface Solutions

305-814-7872

sales@semcofl.com

© 2020 semcofl.com