Modern Seamless Surface Solutions

Tile, Concrete, Wall & Floor Resurfacing, Concrete Finishes, Pool Deck & Waterproofing with our Microcement Products.

Concrete & Tile Resurfacing

Liquid Waterproofing Membrane

Bathroom Tile Resurfacing

Waterproof Plywood

Decorative Concrete Resurfacing

Welcome To SEMCO Florida Surface Solutions

SEMCO FL surface solutions offers a simple way to revitalize and resurface tile, concrete or any existing surface!

SEMCO FL, Microcement, Tile Resurfacing, Concrete Sealers, Waterproofing Membrane and more.

Make Old Surfaces Look NEW using SEMCO’s Microcement

If you’re tired of that old tile wall and don’t want to go through the hassle of removing, replacing, or painting, resurfacing is the best way to cover wall tiles. Tile Resurfacing involves applying a resurfacing compound called a Microcement over the tile. The resurfacing material is easily applied and usually comes in various surface texture finishes and colors to meet your design needs. The Semco Remodel Without Removal™ resurfacing system is an excellent choice if you want to resurface your wall tile.

x-bond-seamless-stone-remodel-without-removal-resurfacing-floor-products-b

It even works on floor tile too.

The Semco system creates a molecular bond with the tile surface, creating a strong, durable, and beautiful new decorative wall or floor.

No Demolition!

With Semco resurfacing products, you can restore and resurface your old tile without having to remove it. No demolition is necessary. The Semco tile restoration solution is simply applied over the tile and you have a new surface in half the time. Semco can accommodate both interior and exterior tile flooring on patios, pools and more. The hassle and headache of retiling your bathroom, living area, patio or even office or commercial building is gone with the Semco system.

We hope you’ll entrust us with your…

Tile, Concrete, Walls, Pool Decks and more, for all your Resurfacing Project needs! You Will Not Be Disappointed!

Our Featured Services

Semco Florida is Florida’s source for Semco’s industry-leading surface solutions and resurfacing products for Concrete and Tile Resurfacing. With a broad range of applications and surface treatment systems, Semco Florida surfacing solutions are used by thousands of residential and commercial customers worldwide. The durability, ease of installation, and the ability to apply to both interior and exterior surfaces make Semco the go to option for concrete resurfacing and other resurfacing projects big and small, including world-class resorts, municipal applications, public school play yards, historical monuments, offices, and residential homes.

Semco Florida proudly serves Miami, Ft. Lauderdale, West Palm Beach, and Florida. Contact us today to find a Semco contractor near you.

semco-fl-x-bond-seamless-stone

X – BOND SEAMLESS STONE

Semco’s X-Bond seamless stone is a zero VOC (zero Volatile Organic Compounds) hybrid of solid stone solid surface solution that gives a sleek, clean seamless stone aesthetic.

semco-fl-remodel-without-removal

Remodel Without Removal™

Semco’s Microcement is uniquely capable of being applied over existing intact surfaces without the requirement for demolition. Great for concrete and tile resurfacing.

semco-fl-clean-color-seal

CLEAN | COLOR | SEAL

The SEMCO Clean | Color | Seal surface care systems are designed to provide powerful surface cleaning, coloring, and sealing for any solid surface. Very easy to use for concrete and tile resurfacing.

We Do it all

SEMCO Resurfacing Solutions

Click on any resurfacing solution image below to learn more.

Where It Goes

The Semco resurfacing products are a great option for a wide variety of spaces and projects. Our solutions can be used in residential and commercial bathrooms, driveways and garages, exterior walkways, pool decks, roof decks, exterior facades, interior walls and stairs. 

What It Can Do

The Semco solution can be used for waterproofing, ADA safety flooring, eco-friendly remodeling projects, decorative concrete, concrete resurfacing, tile and hardwood overlays, and concrete crack repair.

semco-fl-microcement-resurfacing-products-1

Microcement For Contractors

SEMCO Tile Resurfacing Solutions

semco-fl-ada-compliant-flooring-products-1

ADA Compliant Flooring

Create Friction, Build Ramps, Fill Holes

semco-fl-waterproofing-flooring-products-1

Waterproofing Solutions

Waterproof, Eliminate Water Damage

semco-fl-concrete-finishes-new-construction-products-1

Concrete Finishes New Construction

Created Any Aesthetic On Any Surface

semco-fl-decorative-concrete-products-1

Decorative Concrete

Upgrade And Enhance Surfaces

semco-fl-facade-resurfacing-products-2

Facade
Resurfacing

Crack-Resistant, Waterproof, Beautiful

semco-fl-conrete-wall-finishes-resurfacing-products-2

Concrete Wall Finishes

Crack-Resistant, Beautiful, Rinse Clean

semco-fl-interior-floor-resurfacing-products-1

Interior Floor Resurfacing

Low-Maintenance, Beautiful, Long-Lasting

semco-fl-bathroom-remodel-resurfacing-products-2

Bathroom Resurfacing

Rinse Clean, Beautiful, Non-Slip

semco-fl-concrete-crack-repair-products-1

Concrete Crack
Repair

Crack-Resistant, Waterproof, Beautiful

semco-fl-stairs-resurfacing-products-1

Stairs
Resurfacing

Slip-Resistance, Long-Lasting, Beautiful

semco-fl-driveway-resurfacing-products-2

Driveway Resurfacing

Beautiful, Slip-Resistance, Long-Lasting

semco-fl-exterior-walkway-resurfacing-products-2

Exterior Walkway Resurfacing

Durable, Crack-Free, Beautiful

semco-fl-roof-deck-resurfacing-products-2

Roof Decks Resurfacing

Non-Slip, Waterproof, Rinse Clean

semco-fl-pool-deck-resurfacing-products-2

Pool Deck Resurfacing

Slip-resistant, Low-Maintenance, Beautiful

Tile Resurfacing Example: IT’S THIS EASY!

Step 1

Clean The Tile

Step 2

Rolling Primer And Applying Scratch Coat

Step 3

Grout Line Cover-Up

Step 4

The Finish with Microcement

Before & After // “How To” FAQ’s

Wall tile removal power tool

The best power tool to use is a Pneumatic air impact hammer with a chisel bit. If you have to remove a lot of tile be sure to get a compressor with a large air volume capacity. This way you won’t have to constantly be waiting for the compressor to fill up when you drain the air out of it.

How to remove shower tile without damaging wall

When removing tile or stone from a shower wall resist the urge to smash through it with a sledge hammer or other blunt instrument. While this can be satisfying there can be pipes behind and it creates a lot of extra work when the wall has to be rebuilt. First make sure you protect the area below. If you have a tub make sure the sharp shards of tile do not damage the surface. A thick drop cloth will do the job. Next, cut or scrape into a grout line to access the back side of the tile. It may be easiest to start at an outside corner and work your way in. If you start to have success then slowly work your way into the middle. If your bathroom was installed correctly there should be a rigid surface behind the tile like hardiboard or cement board. This will give you a good substrate to be able to pry against. If the grout is holding the tile in place you can use a heat gun or hair dryer to soften the grout. If you do damage parts of the wall it can always be filled with a compound but it does add to material and labor cost and time to do this

Removing wall tile tool

The best tools for removing wall tile are:

  • Heat gun for softening grout
  • Small pry bar
  • Flat head screw driver
  • Chisel and hammer
  • Oscillating saw
  • Angle grinder with tile blade or Dremel tool with tile cutter
  • Sledgehammer (if you aren’t concerned about damaging the wall)
  • Pneumatic hammer with chisel bit

Fix loose tile without removing

The first thing to consider when you have a tile pop out is what actually caused this to happen. If it was just time and/or poor workmanship then a standard remedy will work. If the tile is popping due to water issues then be sure to check you don’t have a leak behind your wall or under your floor. You can do this by checking your water meter when everything is shut off. If moisture is not the issue then there is a simple fix. Drill into the grout around the hollow tile so that you can get a large enough hole to inject an adhesive in. There are numerous manufacturers including Fix-A-Floor that sell an adhesive that you can inject into the hole so that you can adhere the tile without removing it.

How to remove wall tiles intact

Sometimes when you remove tile you actually want to prevent damaging it as you take it off. The first step is to remove the grout between the tiles. This can be done with a tile rake, or, if you have a steady hand, with an angle grinder. Carefully choose the first tile to pry free as this one will probably be the most challenging. Look for the corner that appears to be most available for prying. Using a chisel or flat head screw driver gently pry the tile free as you work your way around the tile. Try not to force the chisel in by being too eager with the hammer. Most importantly, be ready for the tile to fall. Either have a place for it to go or use tape so that once it becomes loose it is hanging on the wall by the tape that is stuck to adjacent areas.

Floors, Walls, Decks & Tile Resurfacing Videos

Tile & Concrete Sealer Resurfacing Kits

semco-microcement-tile-repair-flooring-companies-near-me

Waterproofing for Contractors

how-to-waterproof-window-box-window-waterproofing-solutions

How to Resurface Old Tile

what-is-tile-resurfacing-how-to-resurface-old-tile-and-hide-the-grout-lines

How to Waterproof OSB & Plywood

how-to-waterproof-osb-how-to-waterproof-osb-floors

We Do It All

Resurfacing for Tile, Concrete, Hardwood, Epoxy + more!

Semco Florida’s solid surface solutions product line includes four distinct surface treatment systems applicable to a variety of environments and needs. Semco’s Remodel Without Removal is a resurfacing product that allows you to remodel existing surfaces without having to remove the old surface material. The remodel without Removal system can resurface tile and grout, stone, wood, concrete, vinyl, epoxy and more.

INNOVATION DRIVEN SURFACE SOLUTIONS

We Do It All! Tile, Concrete, Hardwood, Epoxy +

Over three decades of Concrete & Tile Resurfacing

No Demolition! Remodel without Removal

Over fifteen thousand clients and counting...

Who is SEMCO FL?

SEMCO Modern Seamless Surface is an innovation-driven surface engineering company. We specialize in the creation of surfacing products for floors, walls, decks and waterproofing. SEMCO is known for its ability to design, create, and deliver customized surface solutions for clients and projects of all sizes, worldwide. Each of our custom projects ensures lasting durability, waterproofing, and proper ADA safety compliance.

SEMCO FL has provided materials and installations for major hospitality, industrial, commercial, public and residential projects throughout the state of Florida.

30-plus-semco

Redefining the art of surface creativity for over 30 years using GREEN Environment Safe materials.

Ready to take your resurfacing needs a step further?

Let’s start talking about your project or idea and find out how we can help you.